58
Operating the base station answer machine
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / answering_m.fm / 27.10.08
Ve
rsion 4, 16.09.2005
Configuring the network mailbox
for fast access
You can assign the local answer machine
or one of your network mailboxes to key
for fast access (page 71). This setting
is handset-specific.
Configuring the local answer machine for
fast access
Precondition:
At least one of your hand-
set's send/receive numbers matches a
receive number of the answer machine.
v
¢
¢
Voice Mail
¢
Set Key 1
Local AM
Select and press
§OK§
.
Press
and
hold
(idle status).
Listening to messages on the answer
machine
Precondition:
The answer machine is set
for fast access on the handset.
Press and
hold
.
The messages are now played back.
Hands-free operation is activated. You will
hear the answer machine announcement.
If necessary, press the hands-
free button to switch it off.
Operating when on the move
(remote operation)
You can check and activate your answer
machine from any other telephone (hotel,
pay phone etc.), or initiate ringback from
the answer machine with an SMS.
Preconditions:
u
You have set a system PIN other than
u
The phone you are using for remote
operation has touch tone dialling
(DTMF), i.e. you hear different tones
when you press the keys. Alternatively,
you can use a code transmitter (availa-
ble from your mobile phone retailer).
Calling the answer machine and
playing back messages
Precondition:
Your answer machine is
activated.
Dial your own number that is
assigned to the answer
machine as a receive number.
9
When you hear your
announcement, press
9
and
enter the system PIN.
You will be informed whether any new
messages have been recorded. The mes-
sages are now played back. All messages
are played back irrespective of their
receive number. After the new messages,
the old messages are played back. Finally,
the remaining memory time is given.
You can control message playback by
means of the keypad.
Please note:
Remote operation via VoIP connections is pos-
sible as long as DTMF signals are transmitted
(depending on the provider) as SIP info mes-
sages, audible signals in the voice channel
(inband or audio) or as special RTP data pack-
ets (pursuant to RFC2833).
