22
Operating the answering machine
Gigaset S455 / USA EN / A31008-M1714-R301-3-6019 / answering_m.fm / 21.8.07
Setting recording quality
Set the quality you require for your record-
ings. The options are:
Standard
,
High
,
Excellent
. If the quality is higher the
max. recording time is reduced.
v
¢
Ð
¢
Voice Mail
¢
Record Quality
r
Select the recording quality.
§Save§
Press the display key.
Changing language for voice prompt
and pre-recorded announcement
v55O2
Enter the digits.
1
§OK§
Set
American-English.
2
§OK§
Set
Canadian-French.
I
§OK§
Set
Mexican-Spanish.
Resetting fast access on the
answer machine to Network
Voice Mail
The integrated answer machine is factory-
set for fast access. However if you have set
the network mailbox for fast access
(page 24) you can reset this setting.
v
¢
Ð
¢
Voice Mail
¢
Set Key 1
Answer Machine
/
Network Mailb.
Select and press
§OK§
.
a
Press and
hold
(idle status).
After you have selected the network mail-
box or the answer machine, press and
hold
key
1
. You will be connected
directly.
The setting for fast access applies to all
Gigaset S45 handsets.
Operating when on the move
(remote operation)
You can check or activate the answer
machine from any other telephone (hotel,
pay phone etc).
Requirements:
u
You must set a system PIN to a 4-digit
number other than factory default of
u
The phone you are using for remote
operation has tone dialing (DTMF),
such that you hear different tones
when you press the keys. Alternatively,
you can use a code transmitter (availa-
ble from your cell phone retailer).
Calling the answer machine and
playing back messages
~
Dial your own number.
9 ~
While you listen to your
announcement, press the
9
key and enter the system PIN.
You will be informed whether any new
messages have been recorded. The mes-
sages are then played back. You can now
operate the answer machine via the key-
pad or by voice prompts.
Operating the answer machine via the
keypad
The following keys are used for operation:
A
Go to the start of the previous
message.
B
Stop playback. Press 2 again to
resume.
3
Go to the next message.
:
Mark message as "new".
0
Delete current message.
Note:
After message playback, the call will be
terminated.
