Gigaset S455 User Manual Download

Page: 10 / 58

First Steps

Gigaset S455 / USA EN / A31008-M1714-R301-3-6019 / starting.fm / 21.8.07

Please note:

The power adapter must be

always

connected

, as the phone will not oper-

ate without an electrical connection.

Setting up the handset for use

Inserting the batteries

Fit the batteries with the correct polar-

ity (see diagram).

The polarity is indicated in/on the battery

compartment.

Closing the battery cover

First align the notches on the side of

the battery cover with the clips on the

inside of the casing.

Then close the cover, press on the top

so that it clicks into place.

Attaching the belt clip

There are notches for attaching the belt

clip on the side of the handset at the same

height as the display.

Press the belt clip onto the back of the

handset so that the protrusions on the

belt clip engage with the notches.

Opening the battery cover

If fitted, remove belt clip.

Caution:

Use only the rechargeable batteries recom-

mended by Siemens (page 39). Never use con-

ventional (non-rechargeable) batteries or

other battery types as this may cause signifi-

cant damage to health and property. For

example, the outer casing of the batteries

could be destroyed or the batteries could

explode. The phone could also malfunction or

be damaged as a result of using batteries that

are not of the recommended type. Use of bat-

tery packs not authorized by Siemens may void

the warranty on this product.

Summary of Contents for S455



























































Search results

Summary of Contents for S455

Reviews:

Related manuals for S455

Brands by name

Popular brands

Gigaset S455, User Manual

Search results

Summary of Contents for S455

Reviews:

Related manuals for S455

Brands by name

Popular brands