37
Using several handsets
Gigaset S440 / SWZ-engl nur fuer Internet Swisscom / xxxxxx / registration.fm / 21.07.2006
Changing previously set internal
destination number
v
¢
í
¢
Room Monitor
s
Jump to the
Call to:
line.
§Edit§
Press the display key.
§Yes§
Press the display key to con-
firm the prompt.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 36).
¤
Save changes (page 11).
Deactivating the room monitor
remotely
Important
: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Take the call from the room monitor
and press keys
9
;
.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (e.g. no ring-
tone) will however remain activated until
you press the display key
§Off§
on the hand-
set.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with
§Save§
Setting the Walky-Talky mode
The Walky-Talky function allows two hand-
sets to communicate with each other no
matter how far they are from the base sta-
tion.
Example:
You go on holiday and take two
handsets with Walky-Talky functionality
with you. Set the Walky-Talky function
on
both handsets
.
Important:
One
of the following requirements must
be met.
u
Both handsets are registered to the
same base station.
u
Both handsets are registered to differ-
ent base stations and both are set to
Best Base
u
One of the handsets is not registered to
any base station and the registered
handset is set to
Best Base
.
u
Neither handset is registered to a base
station.
Please note:
u
In Walky-Talky mode, the range
between the handsets is a maximum of
300 m in the open.
u
The handsets can no longer be reached
by incoming calls.
u
The Walky-Talky mode severely reduces
the handset operating times.
u
The Walky-Talky mode is retained even
when you switch your handset off and
back on.
