Field
Description
The function is activated by selecting
"
.
The function is enabled by default.
If the function is not enabled, the packets and all related in-
formation are transferred unencrypted. Unencrypted transfer is
not recommended as a default setting and should only be used
for debugging.
2.6.3 Options
This setting possible here causes your device to carry out authentication negotiation for
incoming calls, if it cannot identify the calling party number (e.g. because the remote ter-
minal does not signal the calling party number). If the data (password, partner PPP ID)
obtained by executing the authentication protocol is the same as the data of a listed re-
mote terminal or RADIUS user, your device accepts the incoming call.
The menu System Management->Remote Authentication->Options consists of the fol-
lowing fields:
Fields in the Global RADIUS Options menu
Field
Description
Authentication for PPP
Dialin
By default, the following authentication sequence is used for in-
coming calls with RADIUS: First CLID, then PPP and then PPP
with RADIUS.
Options:
•
"
: Only inband RADIUS requests (PAP,CHAP, MS-
CHAP V1 & V2) (i.e. PPP requests without CLID) are sent to
the RADIUS server defined in Server IP Address.
•
" #G&
: Only outband RADIUS requests (i.e. re-
quests for calling line identification = CLID) are sent to the
RADIUS server.
"
is enabled by default.
2.7 Configuration Access
In the Configuration Access menu you can configure user profiles.
Gigaset Communications GmbH
2 System Management
hybird 120 Gigaset Edition
37
