Gigaset Pro series Hybird 120 Manual Download

Page: 363 / 423

15.7.1 Hosts

A list of all monitored hosts is displayed in the Local Services->Surveillance->Hosts
menu.

15.7.1.1 Edit or New

Choose the

icon to edit existing entries. Choose the New button to create additional

monitoring tasks.

The menu Local Services->Surveillance->Hosts->New consists of the following fields:

Fields in the Host Parameters menu

Field

Description

Group ID

If the availability of a group of hosts or the default gateway is to
be monitored by your device, select an ID for the group or the
default gateway.

The group IDs are automatically created from

. If an

entry has not yet been created, a new group is created using
the

option. If entries have been created, you can se-

lect one from the list of created groups.

Each host to be monitored must be assigned to a group.

The operation configured in Interface is only executed if no
group member can be reached.

Fields in the Trigger menu

Field

Description

Monitored IP Address

Enter the IP address of the host to be monitored.

Possible values:

•

(default value): The default gateway is

monitored.

•

: Enter the IP address of the host to be monitored

manually in the adjacent input field.

Source IP Address

Select how the IP address is to be determined that your device
uses as the source address of the packet sent to the host to be

Gigaset Communications GmbH

15 Local Services

hybird 120 Gigaset Edition

351

Summary of Contents for Pro series Hybird 120








































































































































































































































































































































































































































Search results

Summary of Contents for Pro series Hybird 120

Reviews:

Related manuals for Pro series Hybird 120

Brands by name

Popular brands

Gigaset Pro series Hybird 120, Manual

Search results

Summary of Contents for Pro series Hybird 120

Reviews:

Related manuals for Pro series Hybird 120

Brands by name

Popular brands