46
V
e
rsio
n 2,
06
.0
8.
201
0 / M
o
d
u
leV
e
rs
io
n 1.
0
Working with the Gigaset N720 SPK PRO
Gigaset N870 IP PRO / LUG IE-UK_IM en / A31008-XXXXX-XXXX-X-XX / mess_kit.fm / 8/24/18
Display not in idle mode
Checking the quality of the connection to the measuring base station
Connecting the measuring handsets
If two people perform the measurements, you can check the voice quality by establishing
a connection between the two measuring handsets.
The handsets are in metering mode in idle status.
u
Initiate internal call.
~
Enter the internal number of the other handset using the keypad.
or:
u
Initiate internal call.
s
Select handset. Your own handset is identified by a "<" on the right.
c
Press the talk key.
Calling all handsets
u
Press and
hold
.
Switching on the continuous test tone for the base station
If you perform the measurements alone, you can play a continuous test tone to test the connection
to a measuring base station from a measuring handset.
~
Enter the number string
* * * O 2 2
from the keypad.
c
Press the talk key.
The test melody is played via the loudspeaker. If you have connected a headset, press the speaker
key
d
to hear the melody.
Activating/deactivating the measuring handset
The measuring handset is activated automatically when it is placed in the charger. This means
that it is activated after charging in the charger.
a
With the phone in idle status, press and
hold
the end call key (confirmation tone)
to deactivate the handset. Press and
hold
the end call key again to reactivate
the handset.
Switching the handsfree function on/off
You can also test the quality of the connection via the loudspeaker instead of via the headset.
d
Press the speaker key to switch between earpiece mode and speaker mode.
¤
In this case, place the plastic cover supplied on the headset socket. This improves the quality
in speaker mode.
If the display is not in idle status, it shows the measurement
data at the top edge.
-30dBm-1-04-50H-100
