Gigaset N210 PRO Manual Download Page 46

Page: 46 / 81

mplat

odu

, V

ion 2.

.08.

mpl

te Basiseinstellu

ngen:

rsio

n 3.

.20

Bluetooth

Gigaset N210 PRO / LUG International en / A31008-XXXXX-XXXX-X-XXXX / applications_2_N210-PRO.fm / 8/5/22

Registering Bluetooth devices

The distance between the handset in Bluetooth mode and the active Bluetooth device (headset
or data device) should not exceed 10 m.

Editing the list of known (trusted) devices

Open the list

If a device is connected, the relevant icon is shown in the display header instead of

Edit an entry

Only one headset / hearing device can be registered. When more than one headset is
found, enable the one required using the checkbox (

= enabled).

Bluetooth

Search Devices

. . . the search starts (may take

up to 30 seconds) . . . the names of found devices are displayed . . . possible options:

Options

Trust Device

The subsequent process is dependent on the device to which the
connection is being made. Normally, both devices show the same
authentication code.

Confirm the authentication code on both devices . . . The devices
are connected. The device is included in the list of known devices.

Showing information:

Select the device as required

View

. . . The device name and

address are displayed, as well as functions possible for this device

Repeat search:

Options

Repeat Search

Cancel search:

Cancel

Bluetooth

Known Devices

. . . the known devices are

listed, an icon indicates the type of device

Bluetooth

headset

Bluetooth

data

device

Bluetooth

Known Devices

select entry . . . possible

options:

View an entry:

View

. . . the device name and device address are displayed

Press

to go back

De-registering a device:

Options Delete Entry OK

Deregister all devices:

Options Delete List OK

Edit name:

Options Edit Name OK

edit name

Save

If an active Bluetooth device is de-registered, it may try to re-connect as a "non-
registered device".

Summary of Contents for N210 PRO


















































































Search results

Summary of Contents for N210 PRO

Reviews:

Related manuals for N210 PRO

Brands by name

Popular brands

Gigaset N210 PRO, Manual

Search results

Summary of Contents for N210 PRO

Reviews:

Related manuals for N210 PRO

Brands by name

Popular brands