Gigaset Maxwell 10, Administration Manual

Page: 35 / 46

Maxwell 10 / en / A31008-N4001-R102-1-20 / web_configurator.fm / 22.01.2014
System settings
35
Te
mplat
e
A4, V
e
rsion 1, 0
3.04.2012
System settings
You can create the following settings in the System menu:
u
Define the date and time or time server
u
Security – Change passwords for user identification ( p. 36 )
u
Rebooting the system and restoring factory settings ( p. 36 )
u
Auto Provisioning – Start configuration setting via Auto Provisioning ( p. 36 )
u
Saving and restoring telephone data ( p. 37 )
u
Updating firmware – Perform and configure a firmware update ( p. 37 )
u
Screenshot – Enable screenshot capturing ( p. 38 )
u
System log – Configure and start system logging ( p. 38 )
Date and time
On this screen you can specify a time server or enter the date and time manually.
Settings System Date and Time
Defining the time server
Entering the date and time manually
Setting the time zone
Saving settings
¤
Click on Save to save the settings on this screen.
¤
Select Yes for Automatic adjustment of
system time with time server .
¤
Enter the IP address of the required
server in the
Time server field.
The most recent synchronisation carried
out with the time server is shown.
¤
Select No for Automatic adjustment of
system time with time server.
¤
Enter the date and time :
– Time format : ss:mm
– Date format : dd.mm.yyyy
¤
Select your Time zone from the list.
¤
Activate the Automatically adjust clock
to summer time option if necessary.