Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / settings.fm / 6/3/19
Te
mplat
e
M
odu
le
, V
e
rs
ion 1.
2,
1
1
.09.
20
18
Settings
23
de
en
es fr it
Setting handset names
To initiate an internal call to a handset registered with the phone base (
page 17), you must
give names to the handsets. Names are entered in the contact list on the smartphone.
¤
Open the
Gigaset L800HX
app on the smartphone . . . The start screen is displayed
¤
Tap
. . . The
Settings
screen is opened
Internal Handsets
. . . A list of handsets with
the default names (e.g. INT1 – INT6) is displayed
¤
Tap the field of a handset Use
to enter the name for the handset
Save
. . .
The handset is entered into the contact list with the name specified and with an internal
number (e.g. 1111111115)
You can now call the handset using the following voice command for example (
¤
“Alexa, call the living room”
Deleting/changing a name:
¤
Delete the name in the field using
or use
to enter a different name
¤
Delete the contact from the contact list
Enabling/disabling the phone function
The phone function of the Gigaset Smart Speaker is enabled by default. If you only want to use
the Gigaset Smart Speaker to listen to music, you can disable the phone function.
¤
Open the
Gigaset L800HX
app on the smartphone . . . The start screen is displayed
¤
Tap
. . . The
Settings
screen is opened
Advanced
Features
Enable/disable the
Telephony
function with the
switch
The names you give the handsets from the app are
not
synchronised with the names
set in the base for the handsets. So ensure you use the same names.
You can, on a handset and many phone bases, determine which handsets are regis-
tered with the phone base under which names. The default names on a Gigaset base
are INT1 to INT6 for example.
For detailed information on this refer to the user guide for your phone base or handset
OFF
ON
