Gigaset GS280 / LUG AU-IE-UK-International en / A31008-N1510-L101-1-7619 / settings.fm / 2/22/19
Te
mplat
e
M
odu
le
, V
e
rs
io
n 1.
2,
11
.0
9.
201
8
Security
57
Security
Display lock
The display lock protects the device from unauthorised use. When you switch the device on or
enable the display, you are prompted to unlock the device.
The display lock becomes active after a defined time after the device has switched to idle mode.
A pattern, PIN or password is used as the display lock.
Setting up a display lock
¤
Settings
Security & location
Screen lock
Enter the PIN, pattern or pass-
word if you have already specified a lock
Select the method . . .
For
Pattern
:
¤
Draw the pattern - join together at least four dots
Continue
Repeat the pattern
Confirm
For
PIN
:
¤
Enter at least four letters or digits
Continue
Repeat the PIN
OK
For
Password
:
¤
Enter at least four letters or digits
Continue
Repeat the password
OK
Settings for the display lock
¤
Settings
Security & location
Tap
next to
Screen lock
Make the
setting
Showing/hiding the pattern
Only for a display lock with pattern. When entering the pattern to unlock the device, the pattern
is shown as a line by default. You are able to change this for security reasons.
¤
Enable/disable the switch next to
Make pattern visible
Setting the time for automatic display lock
The display lock is enabled once the device has been in idle mode for a certain time.
¤
Automatically lock
Select the duration of idle mode
Enabling the display lock when switching on and off
¤
Enable/disable the switch next to
Power button instantly locks
None
. . . No security
Swipe
. . . The display can be unlocked by swiping over the screen
Before setting up the lock, you can specify whether the device should prompt
unlocking at the start.