Te
mplat
e
M
odu
le
, V
e
rs
ion 1.
3,
1
1
.04.
20
19,
Gigaset GS195 / LUG AU-IE-UK-International en / A31008-N1514-R101-1-7619 / starting.fm / 11.7.19
10
Charging the battery
¤
Plug the USB Type C connector on the charger
cable provided into the USB Type C connector
on the smartphone
¤
Connect the power adapter to the USB
connector of the charger cable and connect it to
the power source.
The device is charged once the charge icon
in
the Status bar is filled completely.
Switching on the device
¤
Keep the On/Off button pressed until the device vibrates.
When you are requested to unlock the SIM card,
¤
use the keypad to enter the PIN of the SIM card
When switching on the device for the first time, a wizard starts which guides you through the
initial configuration.
Wizard for configuring the device
When you switch on your phone for the first time, you are automatically guided through the
most important configuration steps.
Selecting the language
The set language is displayed.
¤
Select another language as required tap
Start
Inserting SIM cards
This screen is only shown when no SIM card is inserted:
¤
Insert card now ( p. 9)
Insert SIM card later:
Skip
The battery is built-in. This means a higher battery capacity can be realised for the
same device dimensions.
So your phone does not discharge during set-up, keeping it connected to the power
is recommended until set-up is complete.
<
Back: Check and change as required settings already configured.
Next >
Apply the setting on the screen and jump to the next screen.
Skip
Configure the setting later.