73
Making ISDN settings
SX790/795 ISDN / IM-Nord EN / A31008-N415-R201-1-SM19 / registr_sett.fm / 18.08.2010
V
e
rsion 4.1, 21
.11.2007
A list containing the configured and acti-
vated receive connections (MSNs) for your
phone and
Internal
is displayed.
¤
Select the receive connection for which
you want to activate or deactivate call
divert, and press
§OK§
.
¤
You can enter data in the following fields:
Status
Activate/deactivate call divert.
Phone Number
Enter number to which calls are to be
diverted, and press
§Save§
. You can specify
a different number for each MSN.
When
Select
All Calls
/
No Answer
/
When Busy
.
All Calls
: Calls are diverted immediately
i.e., calls for this MSN are no longer sig-
nalled on your phone.
No Answer:
Calls are diverted if no one
accepts the call within several rings.
When Busy
: Calls are diverted when your
line is busy.
Internal call divert
You can divert all external calls to a handset.
v
¤
Ç
¤
Call Divert
¤
Internal
¤
You can enter data in the following fields:
Activation
Activate/deactivate call divert.
To Handset
Select internal party.
Ring Delay
If you prefer to have a delay before the
call is diverted, select the length of the
delay (
None
,
10 sec.
,
20 sec.
or
30 sec.
).
§Save§
Press the display key.
Internal call divert is only single-stage i.e., if
the calls are diverted to a handset that also
has call divert activated, this call divert is not
activated.
Activating/deactivating call
transfer – ECT (Explicit Call
Transfer)
During call swapping you can connect two
external callers (
page 37) to each other by
pressing the end call key
a
. The transfer of
the call by replacing the receiver is not sup-
ported by all ISDN exchanges and PABXs.
v
¤
Ç
¤
Transfer (ECT)
¤
§Change§
(
³
= on)
Base settings
The base settings are carried out using a reg-
istered Gigaset S79H handset.
Activating/deactivating
music on hold
v
¤
Ï
¤
Audio Settings
¤
Music on hold
Press
§Change§
to activate or deactivate the
music on hold (
³
= on).
Activating repeater
support
You can increase the range and signal
strength of the base using a repeater. You
will need to activate repeater mode. This will
terminate any calls being made via the base
at the time.
Prerequisite:
A repeater is registered.
v
¤
Ï
¤
System
¤
Repeater Mode
Press
§Change§
to activate or deactivate
repeater mode (
³
= on).
Please note
Diverting calls to your phone numbers
can result in additional costs. Please con-
sult your provider.
Please note
u
Eco Mode
/ Eco Mode+
and repeater support cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or
Eco Mode+
.
u
Encrypted transmission activated at
the factory is deactivated when a
repeater is registered.
•
