Gigaset Gigaset SX761 dsl Manual Download

Page: 98 / 118

Appendix

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / appendix.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Deactivating HTTP proxy and configuring a pop-up blocker

Before you can start the configuration program of the Gigaset SX761 dsl, you might

need to adjust the settings described below for your Web browser.

Deactivating the HTTP proxy

Make sure that the

HTTP proxy

in your web browser is deactivated. This function must

be deactivated so that your web browser can access your Gigaset SX761 dsl's

configuration pages.
The following section describes the procedure for Internet Explorer and Mozilla Firefox.

First decide which browser you whish to use, and then follow the appropriate steps.

Internet Explorer

Open Internet Explorer and from the

Tools

menu, select

Internet Options

In the

Internet Options

window, click the

Connections

tab.

Click

LAN Settings

Deactivate all options in the

LAN Settings

window.

Click

and then

again to close the

Internet Options

window.

Mozilla Firefox

Open Mozilla Firefox. Click

Tools

and then

Settings

In the

Settings

window, click

Connection Settings...

In the

Connection Settings

window, select the option

Direct connection to the

Internet

Click

to finish.

Configuring the pop-up blocker

You must allow pop-ups for the configuration program in order to start it.

Internet Explorer

If working with Windows XP Service Pack 2, pop-ups are blocked by default. Carry out

the following steps:

Right-click on the browser information bar.

Select

Allow popups from this screen

Confirm the dialogue window by clicking

The configuration screens for the Gigaset SX761 dsl are now allowed as pop-ups.
You can make additional settings for pop-ups within Internet Explorer via the

Tools –

Popup Manager

menu item or via

Tools – Internet Options

on the

Privacy

tab.

Mozilla Firefox

Pop-ups are blocked by default. Carry out the following steps:

Open Mozilla Firefox. Click

Tools

and then

Settings

Summary of Contents for Gigaset SX761 dsl























































































































Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands

Gigaset Gigaset SX761 dsl, Manual

Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands