Gigaset Gigaset SX761 dsl Manual Download

Page: 83 / 118

Administration

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Restoring the saved data

For

Task

, activate the

Restore configuration

option.

Enter the path of the backup file that you want to use to restore the configuration

or choose the file in the file system via the

Browse

button.

A window will appear prompting you to confirm the procedure.

Click

. The configuration will now be updated.

Restoring factory settings

You can reset the Gigaset SX761 dsl to the factory settings. You should do this before

making the device available to others or exchanging it through the dealer. Otherwise

unauthorised persons may use the Internet access data at your expense.

Select

Reset configuration to factory default settings

and click

A window will appear prompting you to confirm the procedure.

Reboot

If the Gigaset SX761 dsl is not operating properly, you can reboot it. It should then be

ready for use again.

In the

Advanced Settings

menu, select:

Administration

–

Reboot

Click

to reboot the device.

A window will appear prompting you to confirm the procedure.

Note:

If the Gigaset SX761 dsl is not operating properly, you can reboot it. It should then be

ready for use again .
Please remember that when the device is fully reset,

all

the configuration settings are

returned to the factory settings. This means that you will have to completely reconfig-

ure the Gigaset SX761 dsl.

Summary of Contents for Gigaset SX761 dsl























































































































Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands

Gigaset Gigaset SX761 dsl, Manual

Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands