Gigaset Gigaset SX761 dsl Manual Download

Page: 78 / 118

Administration

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Internet Time

The

System time

of the device is automatically synchronised with the time server on

the Internet. The time of the

Last synchronization with time server

is displayed for

your information.

If you would like to use your own time server, activate the

option next to the

Use

custom time servers

field.

Enter the Internet address of the time server in the

Preferred time server

Alter-

nate time server

fields.

Click

to apply the settings.

System Password

You can assign a System Password to the Gigaset SX761 dsl user interface and specify

the period after which a session is to be automatically ended if no further entry is made.

In the

Advanced Settings

menu, select:

Administration

–

System Password

After installation, the Gigaset SX761 dsl user interface is protected by the

System Password

admin

. To prevent unauthorised changes being made to the configu-

ration, you should set a new System Password from time to time. You may already have

set a System Password when you set up the

Security Setup Wizard

. If so, you can

change it here.

Enter the old

System Password

in the

Current password

field.

Enter a new

System Password

in the

New password

field and repeat it in the

Confirm new password

field.

Summary of Contents for Gigaset SX761 dsl























































































































Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands

Gigaset Gigaset SX761 dsl, Manual

Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands