Gigaset Gigaset SX761 dsl Manual Download

Page: 77 / 118

Administration

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Regional Options

For operating your Gigaset SX761 dsl, you can select the location, time zone and format

for entering the time and date, and you can also configure a time server for the Internet

time (system time).

In the

Advanced Settings

menu, select:

Administration

–

Regional Options

Select the country you are currently in from the list. You can set the time so that it

automatically switches to summer time or the

Time zone

, as required.

If you have already configured the basic settings, you can change these here.

Select the required option or choose the

Time zone

for your location.

Select the required format for entering the date and time from the

Date format

and

Time format

lists.

Summary of Contents for Gigaset SX761 dsl























































































































Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands

Gigaset Gigaset SX761 dsl, Manual

Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands