42
Configuring Advanced Settings
Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008
Schabl
one 2
005_0
7_2
7
ì
Enter the data you have been given by your service provider:
Protocol
,
User name
,
Password
.
Only if you have selected
PPPoE
as the protocol and if you want to set up a number of
connection services with this protocol:
ì
Enter the name of the connection given to you by your service provider in the
Access concentrator name
field.
ì
Apply the default settings for the parameters
IP address type
,
IP address
,
MTU
,
Line mode
,
Encapsulation
,
QoS class
and
VPI / VCI
unless your service provider has
provided you with other data. The default settings also depend on your choice of
country.
ì
If you have connected an external modem and chosen the connection type
Ethernet
, enter the values for
VLAN tag
for each connection type that you have
received from your Internet service provider.
The
Line mode
,
Encapsulation
,
QoS class
and
VPI / VCI
boxes are then deactivated.
ì
Your Internet service provider may disconnect and reconnect your Internet connec-
tion daily. In this case enable
24h reconnection
and choose the period of time in
which the reconnection should be performed from the
Reconnection time
option
menu.
ì
Specify how Internet sessions are to be established via
Connection mode
:
– Select
Always on
if the connection is to exist at all times when the Gigaset SX761
dsl is turned on.
– Select
Connect on demand
if applications such as an Internet browser or an e-
mail program are to connect to the Internet automatically.
– In the
Idle time before disconnect
field, enter a period after which the Internet
connection is to end automatically if no data is transmitted (the default setting is
3 minutes).
This time setting only applies to the
Connect on demand
and
Connect manu-
ally
options.
– Select
Connect manually
if you always want to establish and end the Internet
connection manually. If you are on a time-based tariff this will save you high con-
nection charges.
Note:
To configure the Internet connection successfully, you must enter the details
given by your provider in all fields.
Notes:
u
You must set up the
Always on
option if you wish to use Internet telephony.
u
If you are on a time-based tariff, this option can result in high connection
charges.
