Gigaset Gigaset SX761 dsl Manual Download

Page: 38 / 118

Configuring Advanced Settings

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Internet

If you have configured the Gigaset SX761 dsl using the two wizards, you have also con-

figured the

WAN

connection (Internet access). You can check or change these settings

in the

Internet

menu.

This menu also offers you a wide range of possibilities for setting up security settings

and limiting access to the Internet as well as for providing your own services on the

Internet.
You can carry out the following via the

Internet

menu:

Internet

Activate/deactivate the Internet connection and edit the

virtual connection parameters (for further information see

below),

Internet Connection

Check and edit the Internet connection of the Gigaset SX761

dsl (for further information see below),

DNS Servers

Make DNS server settings (page 44),

MAC Address

Enter the PC's registered MAC address for Internet access

(WAN interface, see page 45),

Firewall

Protect the network against unauthorised external access

(see page 46),

Address Translation
(NAT)

Provide your own services on the Internet (NAT, see

page 50),

Dynamic DNS

Set up dynamic DNS (page 55),

Routing

Set up routing for your Internet connection services

(page 57).

Summary of Contents for Gigaset SX761 dsl























































































































Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands

Gigaset Gigaset SX761 dsl, Manual

Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands