Gigaset Gigaset SX761 dsl Manual Download

Page: 26 / 118

The user interface

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / configure_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Connecting to the Internet manually

Once you have configured your Internet access (see page 29 and pag e 41), you can

establish a manual connection to the Internet on the start screen if you have selected

Connect on demand

Connect manually

as the Connection mode.

To establish or end an Internet connection manually:

Open the start screen of the Gigaset SX761 dsl as described on page 23.
If you have already started the user interface, click the

Home

tab at the top left of

the window.
If you have not yet started the user interface, do so now and log on.

Click

Connect

to establish a connection to the Internet.

Click

Disconnect

if you no longer require the connection.

Elements in the user interface

The user interface screens contain the following elements:

Button

Log Off

The

Log Off

button is always displayed on the right of the user interface. If you click

Log

Off

, the session is ended and the login screen appears again.

Help

Click the question mark to display explanations about the current

user interface screen.

Buttons and icons used by the wizards

The wizards use graphic icons to show which steps you have already

carried out.

As soon as you have changed the configuration on a screen you can activate the new

setting by clicking

Next >

The

< Back>

button returns you to the previous configuration step.

Cancel

returns you to the start screen. This button is not available for the initial con-

figuration of the device.

Buttons in the Advanced Settings menu

Other buttons may be displayed depending on the function in question. These are

explained in the relevant sections.

Transfers the settings you have made to the

Gigaset SX761 dsl configuration.

Cancel

Deletes all the entries on a screen since the last time you clicked

Summary of Contents for Gigaset SX761 dsl























































































































Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands

Gigaset Gigaset SX761 dsl, Manual

Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands