92
Status information
Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008
Schabl
one 2
005_0
7_2
7
The maximum possible data transfer rate of your DSL port for incoming and out-
going data traffic.
–
Noise margin
The maximum signal-to-noise ratio of your DSL port for incoming and outgoing
data traffic.
–
Line attenuation
The line attenuation of your DSL port for incoming and outgoing data traffic.
–
Output power
The output power of your DSL port for incoming and outgoing data traffic.
u
Address Translation (NAT)
Shows the status of the NAT (Network Address Translation) for the Internet connec-
tion.
u
Dynamic DNS
Shows the status of the configuration for dynamic DNS. If dynamic DNS is set up, the
name of the provider is shown.
ì
Click
Refresh
to refresh this screen and update the displayed data.
Local Network
You will find information about the local network settings on the
Local Network
screen
in the
Status
menu.
In the
Status
menu, select
Local Network
:
u
IP address
Shows the local IP address of the device.
u
Subnet mask
Shows the subnet mask used in the local network.
u
MAC address
Shows the local MAC address of the device for wired data transfer.
u
DHCP Server
–
Status
Shows the status of the DHCP server of the device for automatic assignment of IP
addresses to clients in the local network.
–
DHCP clients
Shows all the clients in the network that have been assigned an IP address. The
Host name
and the
MAC address
are listed to identify each client. Information
is also provided about the
IP address
assigned to each client and about the
Lease
time
for the IP address, i.e. the length of time before the current IP address
becomes invalid and the client is assigned a new address by the DHCP server.
ì
Click
Refresh
to refresh this screen and update the displayed data.
u
Registration Button
Shows the status of the
Registration Button
(Scan button) as enabled or disabled.