Gigaset Gigaset SX100 isdn Instructions Manual Download Page 91

Page: 91 / 185

Setting the answering machine (on SX150isdn)

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / answeringm_config.fm / 26.08.2003

Hiding/showing an answering machine

If you only want to use one or two answering machines for your connection, you can

hide the other answering machine(s) from all displays and menus. By factory default,

AB1 is shown, AB2 and AB3 are hidden.
To hide the answering machine, there must no longer be any messages or memos

stored on it:

◆

If new, unplayed messages/memos are present on an answering machine, you will

be notified when you attempt to hide it. The answering machine remains

shown

◆

If there are still old (already played) messages/memos saved on an answering

machine when trying to hide it, you will be asked if you would like to delete the old

recordings. The answering machine is only hidden if you confirm with

YES

Answering machines that are activated are deactivated when hiding them. When

showing them again, the answering machine returns to the status it had before it was

hidden.

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Setup user

Select the menu item and confirm.

Setup device

Confirm. The list of internal numbers is displayed.

Select the internal numbers of the answering

machine (

INT 91

INT 92

INT 93

Open the submenu.

either ...

Hide the answering machine:

Hide AM?

Select the menu item and confirm.

or ...

Show the answering machine:

Show AM?

Select the menu item and confirm.

Summary of Contents for Gigaset SX100 isdn


























































































































































































Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands

Gigaset Gigaset SX100 isdn, Instructions Manual

Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands