Gigaset Gigaset SX100 isdn Instructions Manual Download Page 41

Page: 41 / 185

Using the directory and other lists

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / directories.fm / 26.08.2003

Sending a single entry or complete list to a handset

You can send single entries or the complete list to another handset that is registered on

the same base. This avoids entering information twice. VIP settings, stored voice

patterns and speed dial digits are not sent.

After an entry has been sent you are asked if you want to send another entry. If you

confirm with the display key

Yes

you can select more entries to send; once you have

finished sending, press the display key

to end it.

The successful transfer of data is confirmed with a message and with the confirmation

tone at the receiving handset. Existing entries in the receiving handset are retained.
Entries with identical numbers are not overwritten. The number of entries that are

stored in the receiving handset may therefore differ from the number of entries that you

have sent to it.
The transfer is cancelled if the phone rings or if the memory of the receiving handset is

full. The last entry to be transferred appears in the display.

Open the directory or speed dial list.

s v

Select an entry and open the menu.

either ...

Send a single entry:

Copy Entry

Select the menu item and confirm.

or ...

Send complete list:

Copy List

Select the menu item and confirm.

... then

Enter the internal number of the receiving handset

and confirm. Sending is initiated.

Summary of Contents for Gigaset SX100 isdn


























































































































































































Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands

Gigaset Gigaset SX100 isdn, Instructions Manual

Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands