Gigaset Gigaset SX100 isdn Instructions Manual Download Page 20

Page: 20 / 185

Preparing to use your phone

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 26.08.2003

Setting the outgoing MSN:

The display shows:

Set outgoing MSN?

Each internal party can be assigned exactly one of the available outgoing MSNs. It is

identified to the person called and the network provider bills the call charges to this

MSN. Each end device can be assigned exactly one of the available outgoing MSNs.

This sequence will be repeated for all handsets registered for your telephone.

Using with a PABX:

Only carry out the following steps if you want to connect your telephone to a private

PABX (not directly to a NTBA).
The display shows:

Operate behind PABX?

The display shows "Installation completed". Press the end call key

, to return to the

idle status of the handset.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the prompt.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the "Set allocation

Internal 11 ?" prompt.
The list of entered MSNs is displayed.

MSN 1:12345678

Select the MSN which should be assigned to this end

device, and confirm.

Press the display key to end this assignment for this

end device.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the prompt.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to confirm the "Set access

code?" prompt.

Enter the access code (outside line code)

Press the display key to open the submenu.

Save entry

Select the menu item and confirm. The Getting

started wizard is closed.

Summary of Contents for Gigaset SX100 isdn


























































































































































































Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands

Gigaset Gigaset SX100 isdn, Instructions Manual

Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands