Gigaset Gigaset SX100 isdn Instructions Manual Download Page 115

Page: 115 / 185

114

Security settings

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / security.fm / 26.08.2003

Defining authorisation

You can set different authorisations for all registered devices:

◆

Unrestricted

(set as factory default)

All devices can answer incoming calls and make external/internal outgoing calls.

◆

Incoming only

The devices can only answer incoming calls. External calls cannot be made. Internal

calls can be made. Emergency numbers can be dialled.

◆

Internal only

The devices can only make and answer internal calls. Emergency numbers can be

dialled.

Emergency numbers

By default, the country-specific emergency numbers are entered. These cannot be

changed or deleted. You can enter five of your own emergency numbers.

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

If required, enter the PIN and confirm.

Security

Confirm.

Authorisation

Select the menu item and confirm.

Internal 11

Select the internal number, e.g.,

Internal 11

Press the display key to open the submenu.

Internal Only

Select authorisation, e.g.,

Internal Only

, and confirm.

The set authorisation is marked with a

‰

Return to idle status.

The emergency number can also be dialled by a handset with restricted

authorisation (e.g.,

Internal only

Summary of Contents for Gigaset SX100 isdn


























































































































































































Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands

Gigaset Gigaset SX100 isdn, Instructions Manual

Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands