Gigaset Gigaset SX100 isdn Instructions Manual Download Page 104

Page: 104 / 185

103

Using several handsets

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / several_handsets.fm / 26.08.2003

Activating/deactivating the Walk and Talk mode

When you are in Walk and Talk mode and you press on the talk key

or handsfree

key

, the call goes to all handsets in Walk and Talk mode. The connection is made with

the first handset to answer the Walk and Talk call.

Using a handset in Walk and Talk mode as a room monitor

The room monitor function can also be used in Walk and Talk mode.

The room monitor will call all handsets that are in Walk and Talk mode.

Press the display key

Off

on the room monitor handset to deactivate the room monitor.

The handset returns to the normal Walk and Talk mode.

Open the menu.

Add. Features

Select the menu item and confirm.

Walk and Talk

Select the menu item and confirm.

Deactivate the Walk and Talk mode:

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

Off

Press the display key.

◆

"Selecting the ringer" (page 139), "Activating/deactivating ringer or

advisory tones" (page 141) and "Activating/deactivating keypad lock"

(page 11) are available in Walk and Talk mode.

◆

To open the menu, press the display key

◆

The Walk and Talk mode is retained even when you switch your

handset off and back on.

Press the display key.

Room Monitor

Select the menu item and confirm.

s r

Scroll

the

Room M.:

line and activate the room

monitor.

s r

If necessary, scroll to the

Level:

line and set the

sensitivity for the noise level (

Low

High

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

Save

Press the display key. The room monitor function is

now activated.

Always check the settings of the room monitor before you leave

home, e.g. sensitivity and phone line.

Summary of Contents for Gigaset SX100 isdn


























































































































































































Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands

Gigaset Gigaset SX100 isdn, Instructions Manual

Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands