Gigaset Gigaset C460, User Manual, Page: 23 / 36

20
Using the network mailbox
Gigaset C460 / BT / A31008-M1706-L151-2-7619 / T-NetBox_SAG-registration.fm / 20.2.06
Using the network mailbox
The network mailbox is your network provider's
answering machine. You cannot use the net-
work mailbox unless you have applied to your
network provider.
Configuring the network mailbox
for fast access
With fast access, you can direct dial the network
mailbox.
The network mailbox is preconfigured for fast
access. You only need to enter the network
mailbox number.
Configuring the network mailbox for fast
access and entering the network mailbox
number
§Menu§
¢
Voice Mail
¢
Set Key 1
Network Mailbox
Select and press
§OK§
(
‰
= on).
~
Enter the network mailbox
number and press
§OK§
.
The entry is stored.
a
Press and hold (idle status).
This setting is now valid for all registered hand-
sets.
Calling the network mailbox
1
Press and hold . This connects you
directly to the network mailbox.
d
Press handsfree key
d
if required.
You hear the network mailbox
announcement.
Viewing a message from the
network mailbox
When a message arrives for you, you get a call
from the network mailbox. If you have
requested Calling Line Identification, the dis-
play shows the network mailbox number. If you
accept the call, the new messages are played
back. If you do not accept the call, the network
mailbox number will be stored in the list of
missed calls and the message key flashes
(page 13).
Using several handsets
Registering handsets
You can register up to four handsets on your
base station.
Automatic registration Gigaset C46 to Gigaset
C460, see page 5.
Manual registration Gigaset C46 to
Gigaset C460
You must activate manual registration of the
handset at both the handset and the base sta-
tion.
After it has registered, the handset returns to
idle status. If several handsets are registered to
the base, the internal number is shown in the
display after registration, e.g. INT 2 .
The registration process is cancelled after
60 seconds. If the handset has not registered
within this time, repeat the process.
On the handset
Menu§
¢
Settings
¢
Handset
¢
Register
Handset
~
Enter the system PIN of the base
station (the default is 0000) and
press
§OK§
. Base is flashing in the
display.
On the base station
÷
Press and hold the registration/
paging key on the base station
(page 1) (min. 1 sec.).
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP functional-
ity as follows.
On the handset
¤
Start to register the handset as described in
its user guide.
On the base station
÷
Press and hold the registration/
paging key on the base station
(page 1) (min. 1 sec.).