Gigaset Gigaset 504 AGU, Instruction Manual, Page: 72 / 93

72
Appendix
Deactivating HTTP proxy and configuring a pop-up blocker
Before you can start the configuration program of the router Gigaset 504 AGU, you
might need to adjust the settings described below for your Web browser.
Deactivating the HTTP proxy
Make sure that the HTTP proxy in your web browser is deactivated. This function must
be deactivated so that your web browser can access your router's configuration pages.
The following section describes the procedure for Internet Explorer and Mozilla Firefox.
Follow the steps for the appropriate browser.
Internet Explorer
ì
Open Internet Explorer and from the Tools menu, select Internet Options .
ì
In the Internet Options window, click the Connections tab.
ì
Click LAN Settings .
ì
Deactivate all options in the LAN Settings window.
ì
Click OK and then OK again to close the Internet Options window.
Mozilla Firefox
ì
Open Mozilla Firefox. Click Tools and then Settings .
ì
In the Settings window, click Connection Settings...
ì
In the Connection Settings window, select the option Direct connection to the
Internet .
ì
Click OK to finish.
Configuring the pop-up blocker
You must allow pop-ups for the configuration program in order to start it.
Internet Explorer
If working with Windows XP Service Pack 2, pop-ups are blocked by default. If the con-
figuration program is blocked carry out the following steps:
ì
Right-click on the browser information bar.
ì
Select Allow popups from this screen .
ì
Confirm the dialogue window by clicking OK .
The configuration screens for the router are now allowed as pop-ups.
You can make additional settings for pop-ups within Internet Explorer via the
Tools –
Popup Manager menu item or via Tools – Internet Options on the Privacy tab.