80
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Handset
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_HS_GO.fm / 11/8/17
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as it is removed from the
charging cradle.
¤
. . . use
to select
Settings
OK
Telephony
OK
Auto Answer
Change (
=
on)
Regardless of the
Auto Answer
setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key
for a further
2 seconds while placing the handset in the charging cradle.
Activating/deactivating visual call signal
Visual indication of incoming calls via the spot LED (e.g. in noisy environments).
¤
. . . use
to select
Settings
OK
Telephony
OK
LED Call
Signal
Change
(
= on)
Changing the earpiece and handsfree volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
During a conversation
¤
Press the volume keys
/
on the right side of the handset
or
¤
Handset Volume
. . . use
to select volume
Save
. . . the setting is saved
In idle status
¤
. . . use
to select
Settings
OK
Audio Settings
OK
Handset
Volume
OK
. . . then
The handset's standby time may be significantly reduced if the display backlight is
switched on.
Changes are only saved permanently in
Profile Personal
.
Changes are only saved permanently in
Profile Personal
.
Without saving, the setting is automatically saved after around 3 seconds.
For the earpiece:
¤
Earpiece
: . . . use
to set the volume
For the speaker:
¤
Speaker
. . . use
to set the volume
Save settings:
¤
Save
