11
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Changing the display language
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤
Press the centre of the control key
.
¤
Press the keys
and
slowly
and successively . . . the
language settings display appears, the set language
(e. g.
English
) is highlighted (
= selected).
¤
To select a different language: Press the control key
until
the desired language is highlighted on the display,
e. g.
Francais
press the key on the right directly underneath the display to activate the
language.
¤
To revert to idle status: Press and
hold
the End call key
Base station
Connecting to the mains power supply
¤
Insert the power cable of the power
adapter into the upper connection socket
at the rear of the base station.
¤
Push both cables into the appropriate cable
channels .
¤
Insert the power adapter into the power
socket .
Connecting to the analogue fixed line network
¤
Insert the phone cable into the lower
connection socket
at the rear of the base
station.
¤
Push both cables into the appropriate cable
channels .
¤
Insert the phone cable into the fixed line
network connection
.
Deutsch
English
Francais
1
3
2
1
2
3
Only use the
supplied
network cable.
The network cable must
always be connected
in order to function, as the phone will
not operate without a power supply.
1
2
3
1
2
3
