Gigaset E560A Manual Download

Page: 21 / 70

Gigaset E560A / LUG US en / A31008-M2728-R301-1-7619 / telephony.fm / 1/21/19

mplat

odu

, V

n 1.

201

Making calls

fr es

Activating/deactivating handsfree mode

Activating while dialling

Switching between earpiece and handsfree mode

During a call and when listening to the answer machine activate or deactivate handsfree mode.

If you wish to place the handset in the charger during a call:

Press and hold the handsfree key

while placing the handset in the charger and for a

further 2 seconds. Otherwise, the call is cancelled.

Muting

You can deactivate your handset’s microphone during a call.

Changing the volume during a call

The volume is changed for the current mode (handsfree mode, receiver).

Press the volume keys on the right-hand side of the handset: up

: louder / down

quieter.

This setting is permanently saved (

page 44).

Extra-loud function:

page 13

Making internal calls

Internal calls are free calls between handsets that you have registered to the same base or calls
between a handset and the base.

(

briefly

press).

Call All

is displayed.

Select handset from the list (the actual

handset is marked with a <) or

Call All

(collective choice).

Holding down

the

key starts a call on

all

registered handsets immediately.

Accepting an internal call

Your telephone rings and the internal number of the caller (e.g.,

INT 2

) or the assigned name

appears in the display. If the call comes from the base,

INT 0

is displayed.

Press the talk or handsfree key

on the handset to accept the call.

Enter the number and press the handsfree key.

Press the handsfree key.

For instructions on adjusting the handsfree volume

page 44.

Mute

Press the display key to mute the handset.

Press the display key to reactivate the microphone.
Press the control key (right) to activate/deactivate the microphone.

Summary of Contents for E560A







































































Search results

Summary of Contents for E560A

Reviews:

Related manuals for E560A

Brands by name

Popular brands

Gigaset E560A, Manual

Search results

Summary of Contents for E560A

Reviews:

Related manuals for E560A

Brands by name

Popular brands