Gigaset E560 A User Manual Download Page 32

Page: 32 / 64

mplat

, V

ion 1

, 01.

014

/ M

odu

leV

ion 1

Operating the answer machine

Gigaset E560A / LUG GBR en / A31008-M2708-L101-1-7619 / answering_m.fm / 7/14/16

Stopping and controlling playback

During message playback:

If playback is interrupted for over a minute, the answer machine returns to idle status.

Deleting an individual message

During playback:

Additional functions during message playback

Select the relevant function using

Continue

Continue message playback.

Date and Time

Display date and time the message was received.

Copy to Directory

Copy the caller's number to the directory.

Show Number

If required, show the number that goes with the name.

Delete All

Delete

all old

messages.

Accepting a call from the answer machine

You can accept a call while the answer machine is recording it:

Recording stops and you can speak to the caller.

If three seconds of the call have already been recorded when you pick it up, the call will be dis-
played as a new message.

Pause playback. Press

again to resume.

Go to the start of the current message.

2 x

Go to previous message.

Go to next message.

2 x

Go to next-but-one message.

Delete

Press the display key.

Menu

Press the display key. Playback stops.

Press the talk key.

If the handset is in the base/charger and the

Auto Answer

function is activated

(

p. 43), the handset automatically answers the call when you remove it from the

base/charger.

Summary of Contents for E560 A

































































Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands

Gigaset E560 A, User Manual

Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands