Gigaset E390 Manual Download Page 9

Page: 9 / 91

Gigaset E390-E390A / LUG_Kombi CH en / A31008-M2908-F101-1-2X19 / starting-A_Kombi.fm / 4/30/20

mplat

odu

, V

ion 2,

.02.

Handset

If connecting to a router:

Plug the phone cable into the telephone connection socket on the router

Handset

Connecting the charging cradle (if included in the delivery)

Connect the flat plug of the power adapter

Plug the mains unit into your power socket

To remove the plug from the charging cradle again:

Disconnect the power adapter from the mains
power supply.

Press the release button

Remove the flat plug

Device without answer machine

Device with answer machine

Device without answer machine

Device with answer machine

The network cable must

always be connected

in order to function, as the phone will

not operate without a power supply.

Summary of Contents for E390




























































































Search results

Summary of Contents for E390

Reviews:

Related manuals for E390

Brands by name

Popular brands

Gigaset E390, Manual

Search results

Summary of Contents for E390

Reviews:

Related manuals for E390

Brands by name

Popular brands