Gigaset E390 Manual Download

Page: 36 / 91

mplat

odu

, V

ion 2,

.02.

20,

Local answer machine (if available)

Gigaset E390-E390A / LUG_Kombi CH en / A31008-M2908-F101-1-2X19 / answering_m_A.fm / 4/30/20

Cancelling remote operation

Press the End call key

or replace the receiver

Settings

Recording a personal announcement/advisory message

The phone is supplied with pre-recorded announcements for announcement and advisory
mode. If a personal announcement has not been recorded, the relevant pre-recorded
announcement is used.

During message playback: Delete current message.

Change the status of a previously played back message to "new".

The next message starts to play. The remaining memory is announced at the end of the
last message.

The answer machine will terminate the connection under the following circumstances:

•

The entered system PIN is incorrect.

•

There are no messages on the answer machine.

•

After the remaining memory announcement.

. . . use

to select

Answer Machine

Announcements OK

. . .

use

to switch between

Record Announcem.

and

Rec. Advisory Msg.

OK OK

record your announcement message (at least 3 seconds) . . . possible options:
Complete the recording and save:

End

. . . the announcement is played back for you to check

Repeat the recording:

New

Cancel the recording:

Press the End call key

Back

Resume the recording:

Recording ends automatically if the maximum recording time of 170 seconds is
exceeded or there is a break in speech for more than 2 seconds.

If the recording is cancelled, the default announcement is used.

The recording is cancelled or not started if the answer machine memory is full.

Delete old messages . . . the answer machine switches back to

Answer & record

mode . . . repeat the recording, if needed

Summary of Contents for E390




























































































Search results

Summary of Contents for E390

Reviews:

Related manuals for E390

Brands by name

Popular brands

Gigaset E390, Manual

Search results

Summary of Contents for E390

Reviews:

Related manuals for E390

Brands by name

Popular brands