36
Gigaset DX800A all in one / USA EN / A31008-N3100-WEB-1-7643 / web_server.fm / 26.8.11
V
e
rsion 6, 21.0
8
.2008
Assigning receive/send connections to bases/handsets,
changing internal names
You can assign as many of your connections as you wish to the base and all regis-
tered handsets. Receive connections determine which handset(s) will ring when a
call is received.
You can assign one of your connections as a send connection to the base and each
handset. The send connection specifies which phone number/VoIP account is
charged for calls from the base or handset.
Exceptions:
A dialling rule has been
defined for the dialled phone number
.
You can also choose to select the send connection from the list of all available con-
nections for each call made from the base/handset.
¤
Open the
Settings
¢
Telephony
¢
Number Assignment
Web page.
The following is displayed for the
Desktop Phone
and every handset (example):
The default name (
INT 1
, ...
INT 7
), any name you have set, and a list of connections
that are configured and active for the phone are displayed for each handset and the
base. The connection names are shown in the
Connection
column. The value
GSM
is displayed for the GSM connection. The GSM connection is only displayed if the
list of known devices contains at least one GSM mobile phone.
¤
Change the internal name of the device in the
Name
field, if required.
¤
Define a connection as the send connection for each device. To do this, select
the option (radio button) following the connection in the
for outgoing calls
column. The previous assignment will automatically be deactivated.
If you select the option
Select line for each outgoing call
instead, you can select
which connection is used to establish a connection every time you make a call.