21
Gigaset DX800A all in one / USA EN / A31008-N3100-WEB-1-7643 / web_server.fm / 26.8.11
V
e
rsion 6, 21.0
8
.2008
Active
(only for VoIP connections and Gigaset.net connection)
You can use the option in the
Active
column to activate (
) and deactivate (
)
VoIP connections. If a connection is deactivated, the phone will not register for
this connection. The connection can be activated/deactivated by clicking
directly on the option. The change does not need to be saved.
To configure a connection or to change the configuration of a connection:
¤
Select the
Edit
button next to the connection.
Setting the fixed line network connection
¤
Open the
Settings
¢
Telephony
¢
Connections
Web page.
¤
Select
Edit
in the
Fixed Line Connection
area.
Connection Name or Number
You can define a name for your telephone connection, which replaces the
default name
Fixed Line
in displays or lists. Enter a name of up to 16 characters
or the phone number of your fixed line network connection.
Dialling mode
The following dialling modes can be selected:
Pulse dial
Pulse dialling mode (PD) is used only for a few old PABXs.
DTMF
Tone dialling (DTMF) is now the most common dialling mode.
Recall
Your phone comes preset with a flash for general operation of the phone on the
main connection. The flash specifies the duration of the line interruption used
to send control signals to the exchange or the telecommunications system
(transfer (ECT), setting up a consultation call, etc.). For operation on a PABX, you
may have to change this value. Please refer to the user guide for your PABX.
Select the required flash from the list.
¤
Select
Set
to save your settings.
Or:
¤
Click the
Cancel
button to reject the changes you have made.
This returns you to the list of connections.
