96
Configuring the system settings
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
V
e
rsion 4, 16.0
9
.2005
Assigning send and receive
connections to internal
parties
If you have several MSNs configured for your
telephone system, you can do the following
for each internal party:
u
Assign a send connection or allow the
internal party to select the line for each
external call (select line).
u
Assign one or several receive connec-
tions. Only calls received via the assigned
MSN(s) are signalled on the device.
Assigning a receive connection
Prerequisite:
Several phone numbers are
configured for your desktop phone.
v
¢
Ï
¢
Telephony
¢
Send Connections
A list of the internal parties (desktop phone,
handsets, fax machine INT8 – where con-
nected) is displayed.
q
Select the internal parties that
should be assigned a new send
connection and press the dis-
play key
§OK§
.
r
Select at each call
or select an
MSN as the send connection.
§Save
Press the display key to save the
changes.
If you select
Select at each call
, the internal
party can select which MSN is used to estab-
lish a connection every time he makes a call.
Assigning receive connections
Prerequisite:
Several connections are con-
figured for your desktop phone.
v
¢
Ï
¢
Telephony
¢
Receive Connections
A list of the internal parties (desktop phone,
handsets, local answering machines, fax
machine INT8 – where connected) is dis-
played.
q
Select the internal parties that
should be assigned new receive
connections and press the dis-
play key
§OK§
.
A list containing all receive connections
(MSN) is opened.
r
Select
Yes
or
No
.
s
Change to the next receive con-
nection.
¤
Repeat these two steps for each MSN.
¤
Press the display key
§Save§
to save the
changes.
Updating the phone
firmware
Prerequisite:
The desktop phone is con-
nected to the Internet (i.e., connected to a
router,
If necessary, you can update your desktop
phone's firmware.
The firmware update is downloaded directly
from the Internet by default. The relevant
Web page is preconfigured to your desktop
phone.
Prerequisite:
The desktop phone is in idle status i.e.,
u
no calls are being made.
u
There is no internal connection to/
between the registered handsets.
u
No handset has the desktop phone menu
open.
