Gigaset DX600 A ISDN User Manual Download Page 68

Page: 68 / 137

Operating the desktop phone answering machine

Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / answering_m.fm / 05.03.2010

rsion 4, 16.0

.2005

After recording, the announcement is
played back for you to check. You can re-
record the announcement with

§New§

Please note:

Recording ends automatically if the max-
imum recording time of 170 seconds is
exceeded or there is a break in speech for
more than 2 seconds.

If you cancel the recording, the pre-
recorded announcement is used again.

The recording is not started or cancelled
if the answering machine memory is full.

Delete old messages and the answer-
ing machine will automatically switch
back to

Answer & Record

mode.

Repeat recording if required.

Playing announcements

Announcements

Play Announcement

Play Advisory Message

If necessary, select answering
machine and press

§OK§

If you have not recorded a personal
announcement, the relevant pre-recorded
announcement is played.

Use

, the end key

§Back§

to stop

playback.

Record a new announcement while playing
the announcement:

§New§

Press the display key.

If the answering machine's memory is full, it
will switch to

Answer only

mode.

Delete old messages and the answering
machine will automatically switch back
to

Answer & Record

mode. Repeat

recording if required.

Deleting announcements/advisory
messages

Announcements

Delete Announcemnt.

Delete Advisory Msg.

If necessary, select answering
machine and press

§OK§

§Yes§

Press the display key to confirm
the prompt.

Once you have deleted your announcement
for the specified answering machine, the rel-
evant pre-recorded announcement is used
again.

Playing messages

The date and time of each message is logged
(provided this has been set,

page 92

)

and displayed during the playback. If Calling
Line Identification is activated, the caller's
number or name is displayed. If the caller's
number is saved in the directory, their name
is displayed. For more information about the
display, please see

page 34

Playing new messages

New messages that have not yet been
played back are indicated by the

icon in

the second display line and by the

key

flashing.

Press the message key.

Answer Mach. 1: / Answer Mach. 2: /
Answer Mach. 3:

Select from the list and
press

§OK§

Or:

Press the play key.

If necessary, select answering
machine and press

§OK§

Or:

Play Messages

If necessary, select answering
machine and press

§OK§

Only the local answering machines that
share a receive connection with the desktop
phone are displayed.

Summary of Contents for DX600 A ISDN










































































































































Search results

Summary of Contents for DX600 A ISDN

Reviews:

Gigaset DX600 A ISDN, User Manual, Page: 68 / 137

Search results

Summary of Contents for DX600 A ISDN

Reviews: