Gigaset DL500a Manual Download Page 90

Page: 90 / 137

Setting up the base

Gigaset DL500A / GRC EN / A31008-N3103-T101-2-7619 / settings.fm / 20.01.11

rsion 4, 16.0

.2005

Setting the ringer melody

You can select various ringers, melodies or
any sound from the resource directory

(page 90)

You can set different ringers for the follow-
ing functions:

Internal calls

For external calls

For external calls to the GSM connection
of a mobile registered via Bluetooth

(

page 77)

; the Bluetooth name of the

mobile is shown subsequently for the
GSM connection

In idle status:

Settings

Audio Settings

Ringer Settings

Melodies

Select

Internal calls

For

external calls

Select the melody for this con-
nection.

s r

Where necessary, select the
next connection and set a mel-
ody etc.

§Save§

Press the display key to save the
settings.

Or:

You can set the ringer melody so it is used for
both internal and external calls.

Select

All calls

Select melody.

§Save§

Press the display key.

§Yes§

Press the display key to confirm
the settings.

The setting for all calls will not work as soon
as you change the setting for an individual
connection.

Setting time control for external
calls

You can specify a time period when you do
not want the base to signal external calls
e.g., during the night.

Prerequisite:

The date and time have

already been set.

Audio Settings

Ringer Settings

Time Control

You can enter data in the following fields:

For external calls:

Select

Off

The following fields only appear when

For

external calls

Suspend ring. from:

Enter the start of the period in 4-digit for-
mat.

Suspend ring. until:

Enter the end of the period in 4-digit for-
mat.

Press the display key

§Save§

Silencing the ringer for
anonymous calls

You can set the base to not ring when exter-
nal callers cannot be identified (anonymous
call).

Settings

Audio Settings

Ringer Settings

Anon. Call Silencing

Select and press

§Change§

If the ringer is silenced for anonymous calls,
then

Anon. Call Silencing

is marked

with

Please note

During this period, you will continue to
receive calls on the base from numbers
to which you have assigned a personal-
ised melody in the directory (VIP).

Summary of Contents for DL500a










































































































































Search results

Summary of Contents for DL500a

Reviews:

Related manuals for DL500a

Brands by name

Popular brands

Gigaset DL500a, Manual

Search results

Summary of Contents for DL500a

Reviews:

Related manuals for DL500a

Brands by name

Popular brands