87
Setting up the base
Gigaset DL500A / GRC EN / A31008-N3103-T101-2-7619 / settings.fm / 20.01.11
V
e
rsion 4, 16.0
9
.2005
¤
You can enter data in the following fields:
Time Control
Prerequisite:
The date and time have
already been set.
Select
On
or
Off
.
The following fields are displayed when
Time Control
=
On
.
Display off from:
Enter the time in 4-digit format when the
backlight should be deactivated in idle
mode.
Display off until:
Enter the time in 4-digit format when the
backlight should be reactivated.
Brightness:
Set the brightness of the display back-
light with
r
.
You can select from five brightness levels
(1 = low – 5 = very bright; e.g., brightness
level 3 =
Š
).
¤
Press the display key
§Save§
.
Changing the handsfree/
receiver volume
You can set the handsfree volume and the
receiver volume, as well as the volume of a
connected wire-bound headset to five dif-
ferent levels.
In idle status
v
¢
Ï
Settings
¢
Audio Settings
¢
Call Volume
You will hear a test tone.
r
Set the receiver volume.
s
Scroll to the
Speaker:
line.
r
Set the handsfree volume.
§Save§
Press the display key to save the
setting.
During a call
You can adjust the volume during a call
using the
R
and
S
keys. Each time
you press the key, the volume will increase or
decrease by one level.
§Save§
Press the display key if neces-
sary to save the setting perma-
nently.
Setting ringers
Setting the volume
You can choose between five volumes (1–5;
e.g., volume 3 =
Š
) and the "crescendo"
ringer (6; volume increases with each ring =
‡
).
You can set different volumes for the follow-
ing functions:
u
Internal calls
and appointments
)
u
For external calls
v
¢
Ï
Settings
¢
Audio Settings
¢
Ringer Settings
¢
Volume
r
If necessary, set the volume for
internal calls and appointment
notification.
s
Scroll to the next line.
r
If necessary, set the volume for
external calls.
§Save§
Press the display key to save the
setting.
When choosing the setting, the ringer will
sound in the volume currently selected.
Please note
You can also use the
R
and
S
keys
to change the volume while an incoming
call is being signalled on the base.
