27
Making calls
Gigaset DL500A / GRC EN / A31008-N3103-T101-2-7619 / telephony.fm / 20.01.11
V
e
rsion 4, 16.0
9
.2005
Making calls via your mobile
connection (Link2mobile)
You can make calls from the base via the
GSM mobile connection on your Bluetooth
mobile.
Prerequisites:
Ending a call
&
Replace the receiver or press the
red end key
T
.
Or if you are making the call with a headset:
¤
Press the
Headset
function key or red
end key
T
on the base.
Accepting a call
An incoming call is signalled in three ways:
by ringing, by a display on the screen and by
the flashing handsfree key
d
.
Accept the call by:
¤
Picking up the receiver.
¤
Pressing the handsfree key
d
.
¤
Pressing the display key
§Accept§
.
¤
Pressing the display key
Ô
to divert
the call to the answering machine.
– Press the display key
Ô
to divert
the call to the answering machine.
To deactivate the ringer, press the
§Silence§
display key. You can accept the call as long as
it is displayed on the screen.
Your GSM mobile is registered to the base
.
u
The mobile is within range of the base
(less than 10 m) and has a Bluetooth con-
nection to the base.
u
The mobile connection is assigned to the
base as the send connection or the base
can select the GSM connection as the
send connection
The GSM connection is set as send
connection:
~ c
Enter the number, including the
area code, and pick up the
receiver. The number is dialled.
"Select at each call" is set instead of a
send connection
~ c
Enter the number, including the
area code, and pick up the
receiver. You are offered a
choice between a fixed line and
a GSM connection.
q
Select the GSM connection.
§Dial§
/
w
Press the display key or the mid-
dle of the control key.
GSM connection/line selection via a
function key
Prerequisite:
You have assigned the GSM
connection or line selection to a display key
or function key
§Sel. Line§
Press the display or function
key.
q
Select GSM connection if neces-
sary.
c
/
§Dial§
Pick up the receiver or press the
display key.
Press
§Dial§
to activate handsfree
mode on the base (open listen-
ing;
).
~
Enter the number with the area
code. The number is dialled
approximately 3.5 seconds after
the last digit is entered.
Please note
A call is cancelled as soon as the mobile is
outside the range of the base (about
10 m) or Bluetooth is deactivated.
