59
SMS (text messages)
Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / sms.fm / 08.10.2003
Adding a text message sender's telephone number to the Phonebook
Precondition:
You have opened the incoming message list and selected a message
Text messages
to a PABX
You can only receive a text message when the Calling Line Identification is
forwarded to the extension of the PABX (CLIP).
The CLIP of the phone number of the SMS centre is evaluated in your telephone.
If your phone is connected to a PABX, you may have to prefix the number of the SMS
centre with an access code (this depends on your PABX). You can store the access code
on your base station (page 124).
If in doubt, you can test your PABX by sending a text message e.g. to your own number
and putting the access code before the number of the SMS centre. If you do not receive
the message, send another one, this time without the access code.
When you send messages, your sender number may be sent without your extension
number. The recipient cannot reply to you directly in this case.
W
Press display key to open menu.
s
Copy to dir.
Select the menu item and confirm.
s ~
Go to the
Name
line and enter the name
(max. 16-digits) (for entering text, see page 131).
W
Press display key to open menu.
Store
Confirm. The entry is stored.
j
Hold
down (back to idle status).
OK
OK
i
The phone number must be stored in the Phonebook together with its
area code (prefix) so that it can also be used for sending text messages.
W
Press display key to open menu.
s
Copy to dir.
Select the menu item and confirm.
s ~
Go to the
Name
line and enter the name
(max. 16-digits) (for entering text, see page 131).
W
Press display key to open menu.
Store
Confirm. The entry is stored.
j
Hold
down (back to idle status).
OK
OK
i
You can create a special Phonebook for SMS within your main Phonebook
by putting an star (*) before the names.
