Gigaset CX203 isdn Manual Download Page 49

Page: 49 / 168

Making cost-effective calls

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / charges.fm / 08.10.2003

Activating/deactivating the charges of the last call

You can display the total charges and the charges of the last call for this terminal on the

terminal.
By factory default,

Last charge

is deactivated.

Once the function has been activated, the call charges are displayed on the terminal

when you lift the receiver. If the connection was not successful, the charges are

displayed after ending the call.

Total and individual charges must be deleted separately, i .e. if

for example you delete the amount for an MSN, the individual charges for

the terminals are retained, and must be deleted separately.

Open the menu.

Costs

Select the menu item and confirm.

Last charge

Select the menu item and confirm (

‰

= activated).

Hold

down (back to idle status).

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands