Gigaset CX203 isdn Manual Download Page 27

Page: 27 / 168

Making calls

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / telephony.fm / 08.10.2003

Picking up a call during ring delay (Call PickUp)

You can pick up a call despite any set ring delay (page 103).

Preconditions:

◆

The party picking up must be authorised with at least

Incoming only

status

(page 91).

◆

Both parties must be assigned the same receive MSN (page 95).

Rejecting a call

You get an external call or you are making a call and receive an external call. The call is

signalled acoustically and also shown in the display on all telephones or handsets in this

MSN group. You can reject this external call.
Press the display key

REJECT

Depending on the setting (page 97) the call can be rejected on the base station rejecting

the call only (telephones or handsets with the same receive MSN continue to ring) or it

can be rejected for the entire MSN group (the caller hears the busy tone).

Reserving a line

Your ISDN connection offers you 2 simultaneously usable telephone lines (B channels).

Precondition:

You want to make calls externally, but both telephone lines of your

connection are busy (being used by other internal users).
Press the display key

CALLBCK

. The next available free line will be reserved for you.

You base station rings as soon as an external line is free.

Defining the send MSN for the next call

Even if you have defined an individual send MSN for the base station (page 95), you can

select another MSN as the send MSN before each call, e.g. for individual recording of

charges.
Make sure that the send/receive MSN corresponds to the phone number registered at

your SMS centre (page 47).

Lift the receiver.

Accept?

is displayed.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Confirm to pick up the call.

either ...

Use a free line:

Lift the receiver. You can now enter the phone

number as usual.

or ...

Delete the reservation:

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

DELETE

Press the display key. The reservation is cancelled.

If the reservation is neither accepted or deleted, it will be deleted

automatically after 30 sec.

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands