Gigaset CX203 isdn Manual Download

Page: 117 / 168

113

Setting the volume, display and keys

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / settings_tel.fm / 08.10.2003

Changing the ringer tone

A range of options is available:

◆

Six volume levels:
– Five volume levels (1–5; e.g. volume level 2 =

– "Crescendo" call (6; the volume increases with each ring =

‰

◆

Ten melodies (1–10; melodies 1–3 are the "traditional ringer tones").

Setting the ringer tone volume

Setting the ringer melody

Open the menu.

Audio

Select the menu item and confirm.

Ringer Volume

Select the menu item and confirm. You will hear the

current ringer tone volume setting.

u v

Set the ringer tone volume and confirm.

Hold

down (back to idle status).

After opening up the menu item

Ringer Volume

, you can also set the

ringer tone volume using the

and

keys.

Open the menu.

Audio

Select the menu item and confirm.

Ringer melody

Select the menu item and confirm. You will hear the

current ringer tone volume setting.

u v

Select the ringer melody. The current melody rings,

the digits at the end of the line indicate the current

setting.

Hold

down (back to idle status).

After opening up the menu item

Ringer melody

, you can also set the

ringer melody using the

and

keys.

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands