Te
mplat
e
G
o
, V
e
rsion 1, 01.
07
.2
014
,
Base station
Gigaset E380A Care / LUG CH en / A31008-N2535-R102-1-4U19 / starting_LUG.fm / 1/14/20
14
Connecting the phone cable and connecting to the Internet
¤
For the landline connection:
Plug the phone cable into the socket
and connect it to the
landline connector on your router
.
¤
For Internet telephony and Internet connection:
Connect one plug of the Ethernet cable
provided into the LAN socket on the side of the base
. Insert the second jack of the
Ethernet cable into a LAN socket on the router
.
¤
Push the cables into the cable channels provided.
As soon as the cable between the telephone and the router is
plugged in and the router is switched on, the key on the front of
the base station lights up (paging key).
You can now make calls over the landline or Internet, and you
can be called. The phone is connected to the Internet.
An answering machine in the base station is set with a pre-
recorded announcement in answer and record mode.
For the Internet connection:
A router or connection in the home network and an IP
account with an Internet provider.
For Internet telephony:
a broadband Internet connection (e.g. DSL) with a flat rate.
1
3
2
4
1
2
3
4
Only use the phone cable
supplied
. The pin connections on telephone cables can
vary.
In order to be able to use all Gigaset GO functions, you may need to install apps on your
smartphone and apply settings in the phone's web configurator, e.g. registering your
phone with Gigaset elements.
Further information about the settings
Further information about Gigaset GO can be found at