Gigaset AS690HX, Manual

Page: 38 / 47

Te
mplat
e
M
odu
le
, V
e
rs
ion 2.
1,
1
1
.08.
20
20
/
Te
mpl
a
te Basiseinstellu
ngen:
V
e
rsio
n 3.
1
-
0
7
.0
7
.20
20
Phone settings
Gigaset AS690HX / LHSG AU en / A31008-M2870-C401-1-7619 / settings_HX.fm / 1/21/21
38 Availability and operation of the functions
may differ on your telephone.
Automatically check whether there is new firmware:
If new firmware is available for the handset, a message to this effect is displayed.
Start the firmware update with OK .
Connections
(only on a CAT-iq router)
On the router, multiple connections can be set up and assigned to the handsets. You can
configure the following connection settings on the handset.
Change the name of a connection (line)
Assigning handsets to a connection (line)
Multiple handsets can be assigned to a connection. Incoming calls to the number designated to
a connection will be forwarded to all handsets assigned to the connection.
Permit/prevent multiple calls
When the function is enabled, multiple calls can be made in parallel.
Permit/prevent internal listening in
When the function is enabled, an internal party can listen in to an external call and take part in
the conversation (conference).
Menu Settings OK Firmware Update Automatic Check OK
( = enabled)
On a Gigaset base with Internet access, you can also set up different connections
and assign them to handsets.
User guide for your Gigaset base
Menu Settings OK Telephony OK Connections OK . . . All avail-
able connections (lines) are displayed Select connection OK Connection
Name Change name of connection OK
Menu Settings OK Telephony OK Connections OK Select
connection OK Assigned Handsets OK . . . all registered handsets are
displayed Select handset OK ( = handset is assigned)
Menu Settings OK Telephony OK Connections OK Select
connection OK Multiple Calls OK ( = enabled)
Menu Settings OK Telephony OK Connections OK Select
connection OK Listening-In OK ( = enabled)