Gigaset AL410A_UK _ A31008-M2237-L151-1-7619
Pack contents
If you have purchased a
model with multiple
handsets
the package should
contain two batteries, a
battery cover, a charging
cradle
8
with mains adapter
9
for each additional
handset.
1
1
one Gigaset AL410A Base station
2
one mains adapter
3
one Gigaset AL410 handset
4
one phone cord
2
3
4
5
7
6
5
two batteries
6
one battery cover
7
this Quick start guide
8
9
Connecting the base station
¤
Connect power adapter
1
and Phone jack
2
to the
base and place the cable
recesses.
Please ensure the power
lead is fully inserted.
Please note:
u
The mains adapter must always be connected, as the Phone will not
operate without a mains connection.
u
Always use the power adapter and Phone cord supplied.
Pin
connections on Telephone cables can vary.
Connecting the charging cradle (if included)
1
1
1
2
¤
Plug the mains adapter into the
plug socket
2
.
¤
Connect the flat plug from the
mains adapter
1
.
If you need to disconnect the plug from the
charging cradle, press the release button
3
and
disconnect the plug
4
.
1
2
4
3
Frequently asked questions
Q: There is no dial tone.
A:
Press call button for 2 seconds (long press) to obtain dial tone.
A short press opens the redial list.
Q: The line is crackling / not clear.
A:
Have you used the new line cable provided? Please do not use an old cable.
Q: The display is not clear / seems to be broken.
A: The display is protected by a plastic film, please make sure you have removed
the protective film.
Q: The handset is not registered.
A:
If your handset is not registered, please follow the Registration handset proce-
dure.
(see user manual)
Q: The caller ID is not working.
A:
Have you subscribed to this service (CLIP) from your provider?
Q: Message indicator flashing and I cannot retrieve my message.
A:
Message indicator will flash to indicate missed calls as well as new messages
of text messages. (see user manual)
Please check:
Have you used the phone cord supplied
¨
Have you fully inserted the power cable into the base station
¨
Have you inserted the batteries correctly
¨
Have you charged the battery for 9.5 hours
¨
Have you set up the Date/Time
¨
To download the latest manuals, visit our web-site: http://www.gigaset.com
You have questions? As a Gigaset customer, you can take advantage of our comprehensive
service offerings. You can find help quickly in this User Manual and in the service pages of
our Gigaset online portal: http://www.gigaset.com
Product may not be fully compatible with the national telephone network. It is clearly
specified on the box near the CE mark for which country/countries the equipment has been
developed. If the equipment is used in a manner inconsistent with this advice or with the
instructions of the manual and on the product itself, this may have implications on the
conditions for warranty or guarantee claims (repair or exchange of product).
In order to make use of the warranty, the product purchaser is asked to submit a receipt
which proves the date of purchase (date from which the warranty period starts) and the
type of goods that have been purchased.
If you have problems setting up or operation this product please call
GIGASET UK HE44 84503 18190
GIGASET IRL HE353 818 200 033
Preparing the handset
Initial charging and discharging of the batteries
¤
Insert the batteries the right way round.
The
polarity is indicated
in/on the battery compartment.
¤
Then
slide the battery cover back into the
main casing until it clicks into place.
If you need to open the battery cover,
for instance to replace the batteries,
place your fingertip in the grooved area
on the top of the cover and slide down.
The correct charge status can only be displayed if the
batteries are first fully charged
and
discharged.
¤
Place the handset in the charger
for
6
hours.
Then remove the handset from the charger,
make and receive Phone calls, setup the Phone
etc. and do not put it on the charger until the
batteries are fully discharged.
6 h
Setting the date and time
Set the date and time so that the correct date and time can be assigned to
incoming calls, and so that the alarm can be used.
Þ
MENU
¤
Press the key below
MENU
on the
display screen to open the main
menu.
¤
Press the key below
OK
on the display
screen to confirm your selection.
The
Date/Time
menu item appears on the
display.
¤
Press the key below
OK
on the display
screen to open the input field.
ç
Settings
”
U
OK
¤
The active cursor position is flashing.
Enter day, month and year as an
6-digit number via the handset,
e.g.
150912
for
15.09.2012.
¤
Press the key below
OK
on the display
screen to confirm your setting.
Date/Time
”
U
OK
Date 15.09.12
”
OK
¤
Press the bottom of the control
key ...
... until the
Settings
menu item
appears.
Setting the date and time
Message indication
Message Indication Key
‘
on handset will flash to indicate one or all of the
following events:
u
missed calls (if caller ID is enabled for your line numbers will be shown)
u
new messages on the answer machine
To retrieve your messages, just press the flashing
‘
key on your handset.
Display in idle status
The strength of the reception signal between base and handset:
– Good to poor:
©
¨
§
¦
– No reception:
¥
Charge status of the batteries:
–
¤
Batteries charged to over 66 %
–
£
Batteries charged to between 34 % and 66 %
–
¢
Batteries charged to between 11 % and 33 %
–
¡
Flashes: batteries charged to below 11 %
–
Ÿ¡ Ÿ¢ Ÿ£ Ÿ¤
Charging
If
Eco Mode+
is activated, the
½
icon is displayed in the top left corner of the
display.
Time
16:09
”
OK
¤
The active cursor position is flashing.
Enter hours and minutes in 4-digit
format, e.g.
1609
for 16:09.
¤
Press the key below
OK
on the display
screen to confirm your setting.
¤
Press and hold
a
to return to idle
status.
©
±
£
INT 1
11.12.
11:56
Þ
Menu
Registration handset
You can register up to
four
handsets to your base. You can also register other
Gigaset handsets and handsets from other devices with GAP functionality.
Your handset should already be registered by default. Nevertheless, if your
handset is flashing
Put into base
you have to register your handset.
If your handset is flashing
Base
then it can be that:
u
Your base station is not switched on, please check if the power supply is
connected properly.
u
There is too much distance between the handset and base.
Automatic registering procedure
In the case the automatic registering procedure failed or you want to
register an additional handset, use the manual registration procedure.
Manual registration procedure
1. On the handset:
MENU
¤
Settings
¤
OK
¤
Handset
¤
OK
¤
Register HS
¤
OK
¤
enter the system
PIN for the base and press
OK
. Default PIN = 0000
2. On the base station:
Within 60 seconds of entering the system PIN, press and hold the
registration/paging key (min. 3 seconds). Registration takes approx.
1 minute.
Place the handset
with the display
facing up in the base
station.
£
Put into base
Þ
Menu
Registering
The handset registers
automatically.
Registration can take
up to 5 minutes.
Do not remove the handset from
the base station during this time.
AL410A
Congratulations
By purchasing a Gigaset, you have chosen a brand
that is fully committed
to sustainability. This product’s packaging
is eco-friendly!
To learn more, visit www.gigaset.com.
