Te
mplat
e
M
odu
le
, V
e
rs
ion 1.
3,
1
1
.04.
20
19,
Additional functions
Gigaset A690IP-AS690IP / LUG-IP MEA en / A31008-M2813-A601-1-UZ19 / applications_IP.fm / 10/30/19
38
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function
remains
activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
Activating and setting the baby monitor
¤
Menu
Baby Monitor
OK
Enable/disable:
¤
Activation
OK
(
= enabled) . . . if a phone number to call is already entered, the baby
monitor is enabled immediately
Entering/changing call number:
¤
Call Target
OK
Select
Internal
or
External Call
OK
for
External Call
, enter
phone number
OK
Baby Monitor
and the number to call are displayed when the baby monitor is enabled and in
idle mode.
Activate/deactivate two-way talk:
¤
Two-Way Talk
OK
(
= enabled)
Deactivate baby monitor / Cancel alarm
Deactivate the baby monitor remotely
¤
Accept alarm call
Press keys
The baby monitor is deactivated and the handset is in idle status. The baby monitor settings
on the handset (e.g. no ringtone) will remain activated until you press the display key
Off
.
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
¤
Test sensitivity.
¤
Test the connection, if the alarm is being forwarded to an external number.
Deactivate the baby monitor:
¤
In idle status press the display key
Off
Cancel the alarm:
¤
Press the End call key
during an alarm
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.