Gigaset A670A Manual Download Page 8

Page: 8 / 71

Gigaset A670A (C530A) / LUG BE-NL en / A31008-M2512-M201-1-3F19 / starting.fm / 7/10/17

mplat

, V

ion 1

, 21.

012

Getting started

Connecting the base station to the telephone network and the
mains power supply

Mounting the base station on the wall (optional)

Connecting the charging cradle (if included)

Insert the phone cable into the con-
nection socket

at the rear of the

base until it clicks into place and
feed under the cable protection.

Insert the power cable for the power
adapter into the connection socket

at the rear of the base and rotate

the right-angle plug under the cable
protection.

Connect the power adapter

Connect the phone jack

Notes

The power adapter must

always be connected

, as the phone will not operate without a

power supply.

Use only the

supplied

power adapter and phone cord. Pin connections on telephone

cables can vary (pin connections,

page 61).

approx.

2 mm

60 mm

Connect the flat plug to the charging cradle

Plug the power adapter into the power socket

If you have to remove the plug from the charging cradle
again:

Disconnect the power adapter from the mains
power supply.

Press the release button

and disconnect the

plug .

Summary of Contents for A670A








































































Search results

Summary of Contents for A670A

Reviews:

Related manuals for A670A

Brands by name

Popular brands

Gigaset A670A, Manual

Search results

Summary of Contents for A670A

Reviews:

Related manuals for A670A

Brands by name

Popular brands